MALFUNCTION
74
smart Stove - 0142 - 42WMSUGAT2-C
Service Wizard
The ›Service Wizard‹ indicates the possible causes of malfunctions on the basis of the detected
symptoms and thus supports immediate and comfortable detection of deficiencies.
Example for protective function
Example for malfunction
Here, a malfunction message with troubleshooting process is presented as an example.
If ›Safety function‹ appears in the display, this is a message,
no malfunction.
In this case, there is no fault, but limits have been exceeded.
The controller indicates that a protective function has been
triggered.
The message is only active until normal operation has been
restored.
›1.10 Service Wizard‹ appears.
The malfunction appears in plan text - here:
›M02: Breakage of sensor on TS1!‹.
If an analysis/repair is not required at present, press ›Menu‹ to
return to the main menu.
The Service Wizard helps detect possible causes of malfunc-
tions.
Acknowledge by selecting ›Next‹.
For this malfunction, the following causes are assumed:
›Cable/connection‹ or ›Sensor‹ -
Select the first menu item and confirm by pressing the knob.
1.10 Service Wizard
17.03.2016
12:14
M50
Overload of fuel
in stove!
Menu
Next
1.10 Service Wizard
17.03.2016
12:14
M02:
Breakage of
sensor on TS1!
Menu
Next
1.10 Service Wizard
17.03.2016
12:14
M02:
Breakage of
sensor on TS1!
Menu
Next
1.10 Service Wizard
17.03.2016
12:14
Possible reasons:
Cable/connection
Sensor
Exit