OPERATION OF THE CONTROLLER
smart Stove - 0142 - 42WMSUGAT2-C
13
esc button
Display
For indication of the operating mode and for communication in case of set-up, malfunction, modifica-
tion and evaluation, the differential temperature controller smart Stove is equipped with a coloured
full graphics display which is permanently backlit.
The display is active as long as there is supply voltage on the controller.
After a preset time (30 - 255 s), backlighting is dimmed to approx. 10%.
Information screen
During normal operation, the information screen is displayed. It shows the active system, the system
state, the current temperatures, and it animates active hydraulic components.
(Example)
Operation mode
When you
turn the knob
while the information screen is shown, the ›Operation mode‹ screen will be
displayed.
NOTICE
The real-time clock has a power reserve of 8 hours minimum.
If the controller is disconnected from power supply for a longer
time, date and time must be set, see “Settings” on page 34.
Active system with current temperatures
Date and time
System 1
17.03.2016
10:35
Indication of demand for domestic hot water and/or
space heating