WEL-
200™ Operating Instructions
5
Document no.
10320104 Revision 2.0
3-1-19
Controls and Indicators
Receiver
1.
Channel assignment switches
-
Assigns a wireless transmitter to the
specified channel
2.
Channel status indicators
-
Indicates current status of each channel
3.
Wireless transceiver module
-
Wireless radio used to communicate with
transmitters
4.
Not used
5.
Open/close direction assignment
switch
-
Assigns channel to either open or close
direction output function
6.
Power indicator
-
On constantly when receiver is powered
up
7.
Status indicator
-
Shows current system status
8.
“Close” direction relay termination
jumper
-
Terminates the COM/NO terminals with a
10k resistor when jumper is placed in the
lower position
9.
“Open” direction relay termination
jumper
-
Terminates the COM/NO terminals with a
10k resistor when jumper is placed in the
lower position
10.
Earth ground
-
Connection point for earth ground
11.
Terminal block
-
Receiver I/O (see Table 1 in
Connections
)
