EMX WEL-200R, Operating Instructions Manual

Page: 4 / 20

WEL-
200™ Operating Instructions
3
Document no.
10320104 Revision 2.0 3-1-19
Specifications
WEL-200R WEL-200T
Operating Range Up to 200 ft. (line of sight)
Operating Frequency 915MHz
Response Time 100ms
Power/Fault Indicator
Red power LED/green
channel LED
Green transmit/status LED
Channel Status Indicator Green LED NA
Channel mode selection switch
Assign each channel to
OPEN/CLOSE function
NA
Outputs

OPEN direction relay:
Form C contacts (NO,
COM, NC)

CLOSE direction relay:
Form C contacts (NO,
COM, NC)

OPEN direction – 300Hz
pulsed: Open collector
transistor output
(opto-isolated)
 CLOSE direction – 300Hz
pulsed: Open collector
transistor output
(opto-isolated)
NA
Resistive termination
10K ohm across NO contact
(jumper selectable)
NA
Power protection Thermal fuse, MOV Thermal fuse
Environmental Rating NEMA 4X
Power Supply 12-24 VAC/VDC
3-3.6 VDC (2x AA batteries)
(ANSI 15-LF, IEC-FR14505
(FR6))
Battery life NA 2 years at 25°C
Current Draw 50 mA NA
Operating Temperature -40°…60°C (-40°…140°F)
Dimensions (L x W x H)
140mm (5.5”) x 34mm (1.3”) x
90mm (3.5”)
180mm (7.0”) x 32mm (1.3”) x
67mm (2.6”)
Weight 200g (7 oz.) 170g (6 oz.)
Connections 12 terminals (18-26AWG) 2 terminals (18-26AWG)