USING YOUR EMU ELECTRIC BIKE
V-CLA-MK3-1
www.emubikes.com
4
To turn the bike on, ensure the battery is on by pressing the button at the bottom of the
battery. Blue indicates the battery is close to fully charged, green means it has some
charge and red means it has no charge.
Basic Controls:
Function
Control
Power assist level up
→
Press ‘+’, 5 is the highest level of assist
Power assist level down
→
Press ‘-’, 1 is the lowest level of assist, 0 is no assist
Mode (Max Speed, Avg Speed, Trip Time, ODO)
→
Press ON/OFF button to cycle through
Lights on / off
→
Hold down ‘+’ button
Walk mode on / off
→
Hold down ‘-’ button, release to stop
The display has a USB connection which can be used to charge your phone or most
other mobile devices. If you have no use for this facility, the USB connector can be
removed.
For more information on the controls of your display, how to access the settings and a
list of error codes, please read the full display manual available online at
www.emubikes.com.
Understanding Pedal Assistance
1. The front hub electric motor will smoothly kick in as you start to pedal with a
barely audible sound. When setting off for the first time, use the lowest level of
pedal assistance.
2. The power assistance provided by the motor enables you to cycle longer
distances and with minimum e
ff
ort to enjoy a comfortable, sweat--
‐
free ride, yet
still arriving at your destination faster than a normal bike. If you add your own
pedalling power, you can gain a physical work--
‐
out and take even more time o
ff
your journey.
3. The power--
‐
assist function kicks in once you start pedalling and stops shortly
after you stop pedalling and immediately upon braking.
4. In accordance with EU regulations, the motor is restricted to giving a maximum
output of 250 watts. The maximum speed permitted is 15.5mph (25km/h).
