Configuration
Copyright © 2010 by EMTrust GmbH All rights reserved
User Manual - CP75X
55
6.2.1 SATA Port X
Enter the next page for detailed hard drive settings.
The BIOS supports up to four SATA drives. The BIOS can
automatically detect the parameters of the drive and will
set the optimum operating conditions of almost all SATA
drives. The BIOS will detect the drive parameters during
power-on self-test (POST), every time the system boots.
By pressing [ENTER], the BIOS will show the SATA
channel submenu. It shows the respective SATA device
information except for e.g. CD ROM or similar devices.
_
Phoenix - AwardBIOS CMOS Setup Utility
_
SATA Port 0
_
╔══════════════════════════════════════════════════╤════════════════════════╗
_
║
SATA HDD Auto-Detection
[Press Enter]
│
Item Help
║
_
║
├────────────────────────║
_
║
SATA Port 0
[Auto]
│
Menu Level
►
║
_
║
Access Mode
[Auto]
│
║
_
║
│
To auto-detect the
║
_
║
Capacity
0 MB
│
HDD’s size, head... on
║
_
║
│
this channel
║
_
║
Cylinder
0
│
║
_
║
Head
0
│
║
_
║
Precomp
0
│
║
_
║
Landing
Zone
0
│
║
_
║
Sector
0
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
║
│
║
_
╚══════════════════════════════════════════════════╧════════════════════════╝
_
↑↓→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:EXIT F1:General Help
_
F5: Previous Values F7: Defaults Settings
_ _
Fig. 49:SATA Channel Master Page
SATA HDD Auto-Detection
This command reads and displays the respective disk
information and parameters again.
SATA Port X
The CP75 Board supports only SATA drives.
The default setting is [Auto].
Choose [None] to deactive or [Manual] for manual setting
of the SATA Port.
