MITSUBISHI EVO 4-8 PLUGIN ECU USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD MAY 2018
5
3.2 CAN Bus 2 Wiring
The ECU CAN Bus 2 is reserved for Emtron CAN Bus devices, expanding the IO capability of
the ECU. The following devices can be connected:
▪
ELC1/2 (Emtron Lambda to CAN 1/2 channel)
▪
ETC4/ETC8M (Emtron Thermocouple to CAN 4/8 channels)
▪
EIC10/EIC16M (Emtron Input to CAN 10/16 Channel)
For more information on each device refer to the downloads section on the website:
(
Emtron ELC/ETC4/EIC10 to CAN
All these CAN devices share a common power, ground and CAN pinout using a 4-way DTM.
See Table 3.1.
Pin
Function
Wire Colour
1
Ground
BLACK
2
CAN Lo
GREEN
3
CAN Hi
YELLOW
4
12V Supply
RED
Table 3.1. CAN Device Power and CAN Deustch Connector Pinout
To help with installation time, each CAN Device pin can be directly connected into the ECU
IO Expansion port. Pinout information is shown Table 3.2.
Name
ECU IO Expansion 12-Way DTM CAN Device 4-Way DTM
Ground
Pin 8
Pin 1
CAN 2 Lo
Pin 12
Pin 2
CAN 2 Hi
Pin 11
Pin 3
Power
Pin 7
Pin 4
Table 3.2. IO Expansion to CAN Device wiring