MITSUBISHI EVO 4-8 PLUGIN ECU USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD MAY 2018
14
6.0 Diagnostic Trouble Codes (DTCs)
On initial installation it is advised to clear all the DTC's if error(s) are reported. To check:
connect to Emtune and look at the DTC status in the bottom toolbar. If there are Errors the
status box will be Red as shown in Figure 6.0.
Figure 6.0. DTC example showing 8 errors.
To open the DTC window, click on the DTC Status box in the bottom toolbar OR use the File
menu -> Open DTC. Next select "Clear ALL DTCs
” and
confirm all the Error Codes have been
removed; the DTC Status box should go Green indicating this as shown in Figure 6.1. Close
the DTC window.
Figure 6.1. DTC example showing no errors.
If the Error Codes have not all been removed, select "Update DTC" then use the DTC
window to locate the sensor that is on fault.
