background image

 

 

 

 

 

 

Version 1.0  Sep. 2007   

 

 

 

 

 

 

 

 

 

 

 

 

 

  

1 GENERAL 

INFORMATION 

This Secure Drive Enclosure kit 

package contains: 

• 

HDD Enclosure  

• 

USB-Y cable  

• 

Software, Driver and Manual CD  

• 

Quick Start Guide 

• 

Pouch 

• 

Screws / Screwdriver (for applicable models only)

 

 

 
 

2  GETTING  STARTED 

Hardware

 

Installation

 

Assembling your hard drive to the Enclosure kit 

 
 

   

 

 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 

Note: 

The pictures are only for illustration and actual accessories may 

differ from picture

 
 
 
 

3 SETTING 

UP 

Security Software Setup 

1. Insert the Installation CD into your CD-ROM drive.  

Select “

Software & Win98 driver

”.

  

 

 

2. When this screen appears,  

For Windows 98/SE:

 

Select “

Install Win98 Driver

” before proceeding to next 

step. 

 

For Windows XP/Me/2000/Vista  

 

Select “

Configure to Secure Drive

”. 

 

 

 

Caution:  

Configuring to 

Secure Drive

 destroys any existing data. Be sure to 

back up the disk contents first.

  

 

3. When this screen appears, follow the on-screen instructions. 

1) Enter

New Password

 

2) Re-enter

Confirm New Password

 

3) At

Hint

prompt, enter a suitable phrase to help you recall 

your password later on. 

4) Click

Prepare Secure Drive

 

 

 

 

4. 

When the installation is complete, please re-connect the USB 
drive into the computer’s USB port for the new configuration to 
take effect. 

 

 

Note

: In order to remove the device to take effect, you could choose either 

device’ end or computer’s end (USB Y cable) to unplug and re-plug 
the USB cable. Otherwise, system will still show the old data in the 
drive.

 

 
 

 

1. Turn to the rear side and remove 

the rear case. Align the hard 
drive’s interface connector to the 
on-board connector.

 

2. Gently lower the hard 

drive till it rests flat 
against the board. 

 

3. Fasten the hard drive’s mounting 

holes to the Case Frame with 2 

bigger screws.

 

 

4. Finally, fasten all the four 

smaller screws at both sides of 
the Case

Quick  Start  Guide 

• 

Mac users please refer to Mac user guide in utility CD.

 

Reviews: