background image

41101-0-0919

Page 1

Empire Comfort Systems Inc. • Belleville, IL

For Use on: GWT35W(nATUrAL, propAne), hWGW350(nATUrAL, propAne)

41052 - venT sAFeTy sWiTch reLocATion kiT

WArninG

This conversion kit is to be installed by an Empire Comfort Systems, Inc. dealer (or other qualified 

agency1)* in accordance with the manufacturer’s instructions and all codes and requirements 

of the authority having jurisdiction. Failure to follow instructions could result in serious injury 

or property damage. The qualified agency performing this work assumes responsibility for this 

conversion.
1 national Fuel Gas code Z223.1 (Latest edition), natural Gas and propane installation code, 

csA B149.1

*The term “qualified agency” means any individual, firm, corporation or company which either in 

person or through a representative is engaged in and is responsible for (a) the installation of gas 

piping or (b) the connection, installation repair, or servicing of equipment, who is experienced 

in such work, familiar with all precautions required, and has complied with all the requirements 

of the authority having jurisdiction.

Tools required:

• 

Phillips Screw Driver

• 

1/4-Inch Nut Driver

• 

Drill (Optional)

• 

5/16-Inch Nut Driver

• 

1/8-Inch Drill Bit (Optional)

relocation instructions

1.  Remove blower (if installed) 

by lifting off 2 mounting 

screws and set aside.

2.  Remove 3 screws from the 

top of heater and 2 screws 

from the lower front. 

see Figure 1.

3.  Remove front casing. 

 

insTALLATion insTrUcTions

sWiTch reLocATion kiT

Figure 1

Reviews: