5
2 Interfaces
Front Panel
Table 1 Front Panel
NO Name
Description
1
POWER
Power indicator light.
The light is green when the DA is working normally.
2
Power switch
Turns the power on or off
3
CH
PROTECT
DA protection indicator light. When the DA overheats, experiences
over-current, over-voltage, or under-voltage, the DA automatically
protects the equipment. In this case, the light turns yellow.
4
CLIP
Peak clipping indicator light. When the input signal exceeds the
rated peak value, the indicator light turns red.
5
SIGNAL
Signal indicator light.
This light turns green and fluctuates depending upon the signal
intensity. If the light is off, there is no input signal.
6
VOLUME
To increasing or reducing the volume level.
