EMPERO EMP.7FG010, Instruction Manual

Page: 9 / 14

9
GAS FRYERS
Kasap Tip Dik Buzdolapları
G INJECTOR CHANGE AND GAS SETTING
GAS FRYER BURNER-INJECTOR CHANGE CHART
Gas Group Gas
7FG010 7FG020
Injector

mm Injector

mm
2
G20 1,2 1,2
G25 1,2 1,2
3
G30
30 mbar 1,6 1,6
50 mbar 1,6 1,6
G31
37 mbar 1,6 1,6
50 mbar 1,6 1,6
Change of Burner Injector;
1. Rip off the injector at the entrance of burner with a suitable tool.
2. Change A injector by paying attention to the datas at chart with suitable injector.
(Image 1)
3.
Adjust the burner entrance setting (F) by loosening ‘B’ bolt and moving the valve to
forward-back. (Image 2)
4. Change C injector by paying attention to the datas at chart with suitable injector.For
this it is enough to take off ‘D’ fitting and pull the gas pipe to down. (Image 3)