EMPERO EMP.7FG010, Instruction Manual

Page: 6 / 14

6
GAS FRYERS
Kasap Tip Dik Buzdolapları
D OPERATION
*Control Panel;
A :
Heating Value (1-8)
B : Lighter Position
C : Gas Flow Stopping Button
D : Gas Flow Button
E : Lighter
*Operating;

According to type of use,make gas entrance connection from behınd the grill.Because the
machine is operated with LPG and NG.

Turn on the gas valves.

Before operating the fryer,place filter and filter into the tank.

Before operating the fryer,

Be sure that oil drainage valve is off.

Open the lid and put oil to the tank.Pay attention to both minimum and maximum lines
while adding oil into the tank.

Provide the valve of gas group to be at lighter position.Press the button and be sure that
pilot group is operated.

Adjust the appliance’s heat (0-8) gradually.

When the oil temperature reaches indicator temperature,heaters are disabled through the
agency of limit thermostat.When the oil temperature is lower than indicator
temperature,the limit thermostat steps in and heaters start to work.Signal lamp is on
again.

Put the materials that will be fried into the tank in the basket during oil heating.

After frying process,swtich the thermostat to (0) position and unplug the appliance.

Before draining the oil from fryer,leave it to be cooled.

In order to drain the oil from fryer,connect the draining pipe to oil valve that is in cabinet
and then drain the oil.