8
7.0 Using the PAC-3P Leakage Tester
7.1 Power On PAC-3P Tester
To turn the PAC-3P on, switch the power button (Figure 1 – No 9) to the ON position.
NOTE: The LCD screen will light up when unit is on.
NOTE: If battery is indicated as low, please change or replace with new batteries.
7.2 Preliminary Electrical Safety Check
Always ensure that the appliance or lead under test is electrically isolated
7.3 Earth Continuity & Leakage Current Measurements
WARNINGS
For leakage current measurement, the equipment rating to be measured shall NOT exceed:
•
For 3-phase 20A plug and socket: 415V/20A
•
For 3-phase 32A plug and socket: 415V/32A
7.3.1 Testing 3-Phase APPLIANCES
Procedure:
1) Plug the 3-phase appliance under test into one of the PAC-3P sockets (20A or 32A).
