11
.
Picture)
Picture)
Picture)
Picture) Allows the display of Analog or Digital channels. (see Analog Picture Mode page
16 or Digital Picture Mode page 14)
Digital)
Digital)
Digital)
Digital) Changes to Digital mode at frequency of marker.
Span Min/Max)
Span Min/Max)
Span Min/Max)
Span Min/Max) Changes the spectrum bandwidth fro 250MHz to 1231MHz.
X
X
X
X----Pol)
Pol)
Pol)
Pol) Performs a cross polarisation check at the marker (or nearest peak) and displays
the result at the lower right of the TFT.
DiSEqC)
DiSEqC)
DiSEqC)
DiSEqC) See DiSEqC on page 18.
Setup)
Setup)
Setup)
Setup) See Setup on page 19.
Beeper)
Beeper)
Beeper)
Beeper) The Beeper function is enabled or disabled and can be used to provide an audio
signal of the signal level at the marker position.
Spec)
Spec)
Spec)
Spec) See the Special Spectrum functions on page 21.
Memory)
Memory)
Memory)
Memory) This allows saving or mixing the Spectrum with saved spectrum pictures. See
the Special Spectrum Mix on page 21.
13/18V)
13/18V)
13/18V)
13/18V) Switches the LNB voltage between 13V and 18V.
22kHz)
22kHz)
22kHz)
22kHz) Switches the LNB 22kHz signal which switches between Lo band and Hi band for
Universal LNBs.
