3
|
ENGLISH
3.0 Functions
1.
Connect button
2.
Strobe light
3.
Siren
4.0 Connect the siren to the alarm system
Connect the siren to the mains.
Press the connect button (0,5 seconds). The Siren will beep once. 3 seconds later it
will give another beep and the strobe light flashes. The siren is now ready to connect
to the alarm system.
Now press the
arm button on the alarm panel. The wireless siren is now connected
to the alarm system after one beep.
Press the connect button from siren again to exit the connecting status.
Note : don’t trigger any other accessories while the siren is in connecting state !
Now test the connection between the alarm system and the siren.
Press the
arm button on the alarm panel. Trigger one of the accessories and
check if both the alarm panel and the siren will hoot. If the siren is not responding to
the alarm panel, please repeat above steps.
