75
|
ENGLISH
15.0 Other functions
In the menu of the surveillance recorder, you will find a few functions which have not
been explained yet. In this chapter we will shortly explain these functions.
Main menu (default screen)
Auto Sequence:
This function is located in the main menu of the surveillance
recorder. By using this function, the surveillance recorder will use
all available channels and shows each channel separately on
screen. The surveillance recorder will switch to another channel
automatically. You can change the ‘Auto sequence’ settings if you
are logged in the main menu and then select
‘Basic
Display
Auto sequence’.
Main menu (When logged in)
Disk:
Here you can view the status of the built-in hard disk. You can
format the hard disk which is built-in the surveillance recorder.
You can also enable or disable the overwrite option, which is on
by default.
Information:
View the software status, MAC Address and serial number of the
surveillance recorder at ‘Device’. Also, the network data can be
shown at ‘Network’. At ‘Record’, you can see the amount of disk
space the recording (s) will consume per hour. Also, the
Resolution, Frame Rate and Quality are shown. Note: The higher
Summary of Contents for EM6304
