30
31
Al termine del montaggio del vetro interno verificare che nell'angolo in basso a
destra fig.(4-6) sia presente la scritta
VIT.
QUICK REFERENCE FAULT FINDING CHART
GAS COOKTOP
Check that the burner is correctly assembled. Sometimes the parts get
misaligned and that interrupts correct gas flow.
Make sure the gas supply is turned on.
Make sure that the burner is dry and clean.
Ensure there is nothing blocking the gas inlet on the burner or the slots in the
flame spreader.
Try to light the burner using a match, this will identify if it is an ignition fault.
Burner will not stay alight
Check that the burner is correctly assembled.
There is a thermocouple valve on each burner. It is a tapered copper point. If
the thermocouple is faulty the flame will not stay alight once you release the
control knob. Hold the knob in for a few seconds to make sure that the
thermocouple reaches temperature.
The ignitor does not spark
While it is not always possible to see the spark there is a clicking sound when
the ignitor is operating.
Make sure the ignitor is clean and dry (this is the cylindrical white point at the
edge of the burner)
Make sure that the burner is correctly assembled.
Make sure that the electricity is turned on.
The flame suddenly looks different
This usually means that the burner is not assembled correctly.
GAS OVEN
Oven wont light
Make sure the gas supply is turned on and the knob turned to maximum
temperature
Make sure the oven door is open
Make sure that the electricity is connected and turned on
Get the electronic ignition sparking before turning on the gas, this is the best
way to encourage the burner to light.
Try to light the oven manually to check if the problem is electronic ignition
related
Oven wont stay alight
Once the oven is lit hold the control knob in for 20 seconds to heat the
thermocouple which will maintain the flame.
Make sure to read the operating instructions in the next section to operate your
cooker correctly. Use the fault list check list below as a reference if you have
any problems. Call 1300 307 917 if you need further assistance
Burner cap
Flame spreader
Burner base
Ignitor
Flame failure device
-
thermocouple
Brass injector
CORRECT COOKTOP BURNER ASSEMBLY
Burner does not stay alight after several attempts
