background image

INSTALLATION INFORMATION

 

EMG MODELS:

 TBP &TPA (4-STRING), TBP5 (5 STRING), 

                        TBJ & TBJA (4-STRING OR NARROW 5-STRING) 

 

             TBCS  &  TBDC (4-STRING)        

Warranty

All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If 

upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This 

warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.   

 

© 2009 Copyright EMG INC. All Rights Reserved.

PO BOX 4394 
SANTA ROSA, CA
95402  USA

P (707) 525-9941
F (707) 575-7046
EMGPICKUPS.COM

0230-0212A

*Note:  Magnet Type: A (Alnico)  C (Ceramic) C/S (Ceramic and Steel) 

   

                                 

                                 

SPECIFICATIONS:

 

 

 

 

 

           

   

MODEL

:

 

 

 

 

TBP  

 TBPA 

 

TBJ  

TBJA 

 

TBP5 

 

TBCS 

TBDC  

 

 

Logo Color 

                           

Silver 

Gold 

 

Silver 

Gold 

 

Silver 

 

Silver 

Silver

Magnet 

Type 

  C 

 C 

 C 

 C/S 

C

Resonant 

Frequency 

(KHz) 

 

3.20 2.61  

3.95 3.20  

3.20  

3.95 4.85  

Output 

Voltage 

(Finger, 

Thumb) 

2.00 2.00  

2.00 1.50  

2.00  

2.00 2.00

Output 

Voltage 

(Thump)   

4.50 4.50  

4.50 4.50  

4.50  

6.00 6.00

Output 

Noise 

(60 

Hz)  -106 

-101 

 -101 

-99 

 -106 

 -109 

-107

Output 

Impedance 

(Kohm) 

 

10 10  

10 10  

10  

10 10

Current 

@9V 

(Microamps) 

 

80 80  

80 80  

80  

235 

235 

 

Battery 

Life 

(Hours) 

 

 

3000 3000  

3000 3000  

3000  

3000 3000

Maximum 

Supply 

(Volts 

DC) 

 

27 27  

27 27  

27  

27 27

PICKUP AND MAGNET DIMENSIONS:

 

All EMG-TB Models have the same housing dimensions (shown above). 

The differences in each of the models are in the magnet widths and type. The drawings below show the magnet placement for all versions, 

4-string and for a narrow 5-string bass. You should check the width of your strings against the magnet dimensions below to make sure there 

is sufficient string coverage. A rule of thumb for any pickup is that the total magnet width should be the string width plus twice the distance 

the pickup is from the strings. So, If the pickup is 3/16” (5mm) from the strings, with a magnet width of  2.90“ (73.5mm) the maximum string width 

would be 2.50” (64mm). If your string width is too wide for the pickups shown below, choose one of the EMG-40 Extended Series Pickups,

with a 4 inch (101mm) housing, where similar styles of EMG pickups are available.

 

MAXIMUM RECOMMENDED STRING WIDTH 2.50"

MAXIMUM RECOMMENDED STRING WIDTH 2.50"

MAXIMUM RECOMMENDED STRING WIDTH 2.50"

EMG-TBP/PA

EMG-TBJ/JA

1.650

EMG-TBP5

3.712

1.650

.90

R .375 TYP

3.250

.125 DIA. MOUNTING HOLES

1.200

MAXIMUM RECOMMENDED STRING WIDTH 2.50"

2.900

EMG-TBCS/DC

1.200

1.200

2.900

Summary of Contents for TBP

Page 1: ...put Impedance Kohm 10 10 10 10 10 10 10 Current 9V Microamps 80 80 80 80 80 235 235 Battery Life Hours 3000 3000 3000 3000 3000 3000 3000 Maximum Supply Volts DC 27 27 27 27 27 27 27 PICKUP AND MAGNET DIMENSIONS All EMG TB Models have the same housing dimensions shown above The differences in each of the models are in the magnet widths and type The drawings below show the magnet placement for all ...

Page 2: ...DO NOT require string grounding This greatly reduces the possibility of reverse polarity shock from microphones and other equipment 5 EMG Active Pickups have very little magnetism compared to passive pickups We recommend you adjust the pickups as close to the strings as possible Sustain and string movement will not be inhibited by close adjustment 6 If your installation is different from the diagr...

Page 3: ... Pickup Cable onto the Neck Volume control Plug the Bridge Pickup Cable onto the Bridge Volume control 3 Plug a coax cable from the Neck Volume control to the Bridge Volume Control 4 Plug a coax cable from the Bridge Volume control the Master Tone control 5 Plug the output cable onto the Master Tone control and connect the output wires to the output jack by pushing the connectors on as shown WHITE...

Page 4: ... R S NK VOLUME FROM NECK PICKUP FROM BRIDGE PICKUP BR VOLUME BATTERY NEG MASTER TONE Diagram 6 2 Pickups Toggle Style Switch Volume each Pickup Volumes are independent Master Tone OUTPUT CABLE RED RED RED GROUND BRIDGE P U NECK P U OUTPUT 9V 9V 9V 9V T R S RED BLACK Using the B157 Pickup Buss If your instrument has 2 Pickups and a selection switch you will be using the B157 Pickup Buss to send the...

Reviews: