12
ETL Model No.: CF530
5. Ceiling Fan Assembly
(continued)
LIGHT KIT ASSEMBLY
LIGHT KIT ASSEMBLY
CONNECTOR
FAN MOTOR
CONNECTOR
Figure 16
5.6
The two connectors are keyed and color-coded and
must be mated correctly (color-to-color) before they can
be engaged.
Engage the wire connector of the light kit fixture with
the fan motor wire connector. Make sure each
connector latches properly (Figure 16).
M4 x 6mm PAN
HEAD SCREWS
(2 removed, opposite
of each other)
LIGHT KIT
ADAPTER
LIGHT KIT
ASSEMBLY
M4 x 6mm PAN
HEAD SCREWS
(2 loosened)
Figure 17
5.7
Remove two M4 x 6mm pan head screws (opposite of
each other) (retain for future use) from the light kit
housing adapter in preparation of installing the light kit
fixture (Figure 17).
Loosen the remaining two M4 x 6mm pan head screws
from the light kit housing. (Figure 17).
Carefully tuck all wires and connectors into the light kit
fixture.
Place the light kit fixture onto the light kit housing
screws.
Reinstall the previously removed M4 x 6mm pan head
screws into the remaining holes of the light kit fixture.
Tighten the four M4 x 6mm pan head screws to secure
the light kit fixture to the light kit housing adapter
(Figure 17).
BP7484 Wyatt CF530 12/18/13 11:52 AM Page 12
