manualshive.com logo in svg

Emerson USB Fieldbus Interface, User Manual, Page: 50 / 59

Share
Download
Emerson USB Fieldbus Interface User Manual Download Page 50

Appendix D

Install drivers manually

Notes

•

If you have previously installed a pre-release version of drivers, follow the procedure in 

Appendix F

 first before installing new drivers manually.

•

The following procedure only applies to Windows XP operating systems. On Windows 7

operating systems, drivers are automatically installed.

•

There are two drivers that have to be installed manually; one for ports and another for USB

controllers. You need to complete the driver installation on the Found New Hardware Wizard

twice

 to install both drivers.

1. Connect the USB Fieldbus Interface to the computer using the USB cable

provided.

This facilitates manual installation of drivers through the Found New
Hardware Wizard.

2. From the Found New Hardware Wizard, select the 

No, not this time

 option

and click 

Next

.

3. Select the 

Install from a list or specific location (Advanced)

 option and click 

Next

.

4. Select the

 Search for the best driver in these locations

 option and select the

Include this location in the search

 check box.

User's Manual

May 2014

50

Summary of Contents for USB Fieldbus Interface




























































Reviews:

No comments