background image

PS/79 and PS/80

Instruction Manual
0004EN-PS7980-IM

November 2009

 -

 Rev.01

Type PS/79 and PS/80 Pilots

INTRODUCTION

Scope of Manual

This manual provides installation, startup, maintenance, trouble-
shooting and spare parts for the pilot series PS/79 and PS/80.

Product Description

Designed for pressure regulators control, the following types 
are available:

PS/79 

• 

- single diaphragm pilot for pilot controlled gas 

pressure regulator (active or wide-open monitor)

PSO/79 

• 

- single diaphragm pilot for setting of first 

pressure reducing step of pilot controlled gas pressure 
regulator (working monitor)

REO/79 

• 

- single diaphragm pilot for setting of downstream 

pressure reducing step of pilot controlled gas pressure 
regulator (working monitor)

In case of failures, these pilots with single diaphragm will 
cause a fail open reaction of the regulator.

PS/80 

• 

- double diaphragm pilot for pilot controlled gas 

pressure regulator (active or wide-open monitor)

PSO/80 

• 

- double diaphragm pilot for setting of first 

pressure reducing step of pilot controlled gas pressure 
regulator (working monitor)

REO/80 

• 

- double diaphragm pilot for setting of 

downstream pressure reducing step of pilot controlled gas 
pressure regulator (working monitor)

In case of failures, these pilots with double diaphragms will 
cause a fail close reaction of the regulator.

RE/79 and RE/80 versions are in accordance with specific 

requirements of Italian market applications. 

Tightness cover version available on request (e.g. PS/79-D 
and PS/80-D).

The full range of PS pilots can be installed in the following 
pressure regulators:

FL Series - Cronos Series - EZH Series - 971 Model

ChaRaCTERISTICS

aPPLICaTION

aLLOWaBLE  

PRESSURE

PS

 

(bar)

SET RaNGE

W

d

(bar)

BODY aND 

COVERS  

MaTERIaL

REGULaTOR 

OR

MONITOR

WORKING MONITOR

REGULaTOR

MONITOR

PS/79

PSO/79

REO/79

100

0.5 - 40 *

Steel

PS/80

PSO/80

REO/80

1.5 - 40 *

(*) PS/79-AP and PS/80-AP versions are available on request with a set range up to 60 bar.

Table 1. Technical features

1/4” NPT female threaded connections.

All PS/ series pilots are supplied with a filter (5µ filtering 
degree) and built-in pressure stabilizer, with the exception of 
pilots PSO/79 and PSO/80.

SUMMaRY

Introduction  ........................................................................   1

Characteristics  ...................................................................   1

Labelling  ............................................................................    2

Dimensions and Weights  ...................................................   2

Installation  .........................................................................    2

Startup  ...............................................................................   2

Periodic Checks  ................................................................    2

SEP Statement  ..................................................................    2

ATEX Requirements  ..........................................................    2

Maintenance  ......................................................................   3

Troubleshooting  .................................................................   4

Parts Lists  ..........................................................................   4

Schematic Assemblies .......................................................   6

Figure 1.  Type PS/79 and PS/80 Pilots

Summary of Contents for TARTARINI PS/79









Reviews: