8
U.L. Model No.: 52-CL
6. Using Your Ceiling Fan
CHAIN COUPLING
3-SPEED SWITCH
PULL CHAIN
WOOD PENDANT
WITH CHAIN
Figure 11
To reduce the risk of fire or electrical shock, do NOT
use this fan with any solid-state speed control device.
WARNING
!
Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.
WARNING
!
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
7. Maintenance
Reverse Switch Information
Season
Blade Rotation Direction
Summer
Counter-Clockwise
Winter Clockwise
6.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box.
Connect the Wood Pendant with Chain to the 3-Speed
Switch Pull Chain using the Chain Coupling (Figure 11).
Check the operation of the Fan by gently pulling
on the 3-Speed Switch Pull Chain (Figure 11).
The operation sequence is as follows:
1st pull - High
2nd pull - Medium
3rd pull - Low
4th pull - OFF
REVERSE
SWITCH
SWITCH
HOUSING
6.2
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward.
During the Winter Months, run the Fan Clockwise, as
you look up at it, to direct airflow upward.
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning.
Slide the Reverse Switch (located on the Switch
Housing) to the opposite position, and turn the Ceiling
Fan on again (Figure 12).
The Fan Blades will turn in the opposite direction and
reverse the airflow.
Figure 12