4
U.L. Model No.: 52-CL
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 6). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
!
This Manual Is Designed to Make it as Easy as Possible for You to Assemble,
Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips Head Screwdriver
One Stepladder
One 1/4” Blade Screwdriver
One Wire Stripper
Materials
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire would be
a 3-conductor (2-wire with ground) of following size:
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50-100 ft.
12
1. Unpacking Instructions
(Continued)
This Ceiling Fan may be used with the following
Accessories (Purchased Separately): SW46 4-Speed
Slide Wall Control, SW90 Fan & Light Dual Slide Wall
Control and LED Light Fixtures.
2. Electrical Requirements
Your new Ceiling Fan will require a Grounded Electrical
Supply line of 120 Volts AC, 60 Hz, 15 Amp Circuit.
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable
for Fan Support of 22.7 kg. (50 lbs.) or less”, and
use screws supplied with outlet box. Most outlet
boxes commonly used for support of light fixtures
are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
WARNING
!
To avoid fire or shock, follow all wiring instructions
carefully.
Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
WARNING
!
The Outlet Box must be securely anchored and capable
of withstanding a load of at least 50 pounds.
If your Fan is to replace an existing ceiling light fixture,
turn Electricity Off at the Main Fuse Box at this time and
remove the existing light fixture.
Please call Technical Support at 1-800-654-3545 if you
have any questions about installation and operation of
this Ceiling Fan.