15
RXi2 - LP Industrial PC Quick Start Guide
GFK-3074F
Initial Login
When the user connects to PACEdge for the first time (using the
instructions outlined in
PACEdge in a Direct-Use Configuration
or
), a warning message will display due to the
self-signed certificate on the unit. The message will state that the
identity of the device could not be confirmed. Please click on Advanced
and Accept to proceed.
Please read and accept the Emerson End User License Agreement
(EULA).
Once EULA has been accepted, the user will be redirected to the
Password Services screen. PACEdge software consists of multiple
software tools and applications, each having its user management and
password settings. To simplify this task, PACEdge comes with pre-
configured users:
admin
,
developer
, and
operators
, each having its own
password. Use the Password Services screen to change passwords for
the whole group of services. This will be displayed on the left side of the
screen. (Figure 9). Additionally, change the Portainer and Cockpit/Linux
passwords individually (Figure 10).
Note: For cybersecurity reasons, the user must change the default
passwords at the first login.
Important: Please consult the PACEdge Secure Deployment Guide
(GFK-3197) for recommended password changes and other
cybersecurity-relevant settings.
