RXi2-UP IPC Hardware Reference Manual
Section 5
GFK-3047D
Oct 2021
Installation and Startup
13
Section 5:
Installation and Startup
This chapter describes the installation and initial startup operations. Because the unit is
available in several configurations, the description in this chapter is related to a standard
configuration.
WARNING
Before installing or removing any component, make sure that the system power and
external supplies have been turned off.
CAUTION
Static-sensitive Devices: Handle only at static-safe workstations.
CAUTION
Drain static electricity before you install or remove any parts. Installing or removing
modules without observing this precaution could result in damage to this and/or other
components in your system.
5.1
General Installation Guidelines
Adhere to the following guidelines during installation:
•
Observe all safety procedures to avoid damaging the system and protect
operators and users.
•
Before installing or removing any board, verify that the system power and external
supplies have been turned off.
•
Verify that the jumpers (if any) are correctly configured for your application.
•
Make sure the RXi2-UP IPC is properly mounted.
•
Connect all I/O cables.
•
Do not restore power until all components are fitted correctly into the system and
all connections have been made properly.
5.2
Required Materials
The following items are required to start the RXi2-UP IPC in a standard configuration:
•
•
•
