Emerson RTM-ATCA-F125, Installation And Use Instruction

Page: 19 / 62

Chapter 2
RTM-ATCA-F125 Installation and Use (6806800K30C)
21
Hardware Preparation and Installation
2.1 Overview
z
Inspect the shipment and unpack the RTM.
z
Make sure environmental and power requirements are met.
z
Install the RTM.
2.2 Unpacking and Inspecting the RTM
The shelf should provide minimum airflow to the RTM slot according to the class B.3
requirements of the CP-TA Inter-operability document AdvancedTCA Book 1.1. This includes
the following:
z
2.0 cfm at 25 °C ambient temperature
z
2.8 cfm at 40 °C ambient temperature
z
4.4 cfm at 55 °C ambient temperature
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:
z
Printed Quick Start Guide and Safety Notes Summary
z
RTM-ATCA-F125
Damage of Circuits
z
Electrostatic discharge and incorrect installation and removal of the blade can damage
circuits or shorten its life.
z
Before touching the blade or electronic components, make sure that you are working in
an ESD-safe environment.