Emerson Rosemount Ultrasonic 3410 Series, Manual, Page: 52 / 80

B Communication/Output settings
B.1 Summary table of communications/output settings
Based on switch position on the 3400 CPU board and Option board if
installed, indicate the appropriate configuration for each communication/
output parameters on the 3400 electronics. Use these parameters to
configure the 3410 Series electronics.
Table B-1: Communications/Output Settings Summary Table
Output
type
(Check electronics switch settings and circle appropriate box for
each output)
Serial
port A Not
used (if
J6 not
used) RS-232 (if S3 is set
to RS232) RS-485 Half
Duplex (if S3 is set
to RS-485 and S5-1
is set to Half RS-485 Full Duplex
(if S3 is set to
RS-485 and S5-1 is
set to Full
Serial
port B Not
used (if
J7 not
used) RS-232 (if S4 is set
to RS232) RS-485 Half
Duplex (if S4 is set
to RS482 and S5-2
is set to Half) RS-485 Full Duplex
(if S4 is set to
RS-485 and S5-2 is
set to Full)
Serial
port C Not
used (if
J16 not
used) RS-232 (if S10 is
set to RS232) RS-485 Half
Duplex (if S10 is
set to RS-485)
Digital
output
1A Not
used (if
J4-2 not
used) TTL (if S8-1 is set
to TTL) Open Collector (if
S8-1 is set to OC)
Digital
output
1B Not
used (if
J4-1 not
used) TTL (if S8-2 is set
to TTL) Open Collector (if
S8-2 is set to OC)
Frequen
cy
output
1A Not
used (if
J4-1 not
used) TTL (if S8-3 is set
to TTL) Open Collector (if
S8-3 is set to OC)
Digital
output
2A Not
used (if
J5-2 not
used) TTL (if S9-1 is set
to TTL) Open Collector (if
S8-1 is set to OC)
Digital
output
2B Not
used (if
J5-2 not
used) TTL (if S9-2 is set
to TTL) Open Collector (if
S9-2 is set to OC)
Upgrade kit instructions February 2022
52 3410 Series Electronics Upgrade kit instructions