Figure 5-4: Detector and Tilt Mount Assembly Using Lower Mounting Access
A. Back cover
B. Detector
C. Alignment tool tightening bolt
D. Alignment tool
Table 5-4: Tilt Mount Kit
Item
Quantity
Type / model
Tilt mount
1
N/A
Screw
1
M10 x 1.5
Spring washer
1
No. 10
Prerequisites
Prior to mounting the tilt mount to a stable surface, verify that the line of site is
unobstructed and corresponds to the detector's installation distance.
Procedure
1. Place the tilt mount holding plate in its designated location and secure it with four
fasteners through four holes with diameters of 0.3-in. (8.5 mm).
NOTICE
Skip this step if the tilt mount is already installed.
Reference Manual
Installation
00809-0100-4036
October 2021
Rosemount 936
43
Summary of Contents for Rosemount 936
