Emerson Rosemount 752 FOUNDATION, Reference Manual, Page: 30 / 48

24
Reference Manual
00809-0100-4377, Rev CA
Operation and Maintenance
January 2018
Operation and Maintenance
3.3 Resource block
3.3.1 Master reset method
To perform a master reset, run the Master Reset Method. If your system does not support methods,
manually configure the Resource Block parameters listed below.
1. Set the RESTART to one of the options below:

Set Run to nominal state when not restarting (default)

“Resource is not used by device”

Defaults set all device parameters to F
OUNDATION
Fieldbus default values

The Processor does a software reset of the CPU
3.4 Software upgrade in the field
Software for the Rosemount
™
752 with F
OUNDATION
™
Fieldbus is easy to upgrade in the field using the
F
OUNDATION
Fieldbus Common Device Software Download procedure.
3.5 Service support
To expedite the return process outside of the United States, contact the nearest Rosemount
representative.
Within the United States, call the Rosemount National Response Center using the 1-800-654-RSMT
(7768) toll-free number. This center, available 24 hours a day, will assist you with any needed information
or materials.
The center will ask for product model and serial numbers, and will provide a Return Material
Authorization (RMA) number. The center will also ask for the process material to which the product was
last exposed.
Rosemount National Response Center representatives will explain the additional information and
procedures necessary to return goods exposed to hazardous substances.
Individuals who handle products exposed to a hazardous substance can avoid injury if they are
informed of and understand the hazard. If the product being returned was exposed to a hazardous
substance as defined by OSHA, a copy of the required Safety Data Sheet (SDS) for each hazardous
substance identified must be included with the returned goods.