![Emerson Rosemount 644 Reference Manual Download Page 42](http://html.mh-extra.com/html/emerson/rosemount-644/rosemount-644_reference-manual_104724042.webp)
32
Reference Manual
00809-0200-4728, Rev RA
Section 2: Configuration
April 2015
Configuring LCD display with AMS Device Manager
1.
Right click on the device and select
Configure
.
2.
In the left navigation pane select
Manual Setup
.
3.
On the
Display
Tab there will be a group box with all available variables that can be
displayed.
4.
Check and un-check the desired display variables, with a checked box indicating that
the variable will be displayed.
5.
Select
“Apply”
when complete.
Configuring LCD display with LOI
Reference the figure below to find the LCD display value configuration path on the LOI.
Figure 2-17. Configuring the LCD Display with the LOI
* Available only if option code (S) or (D) is ordered.
2.9
Inputting device information
Access the transmitter information variables on-line using the Field Communicator or other
suitable communications device. The following is a list of transmitter information variables,
including device identifiers, factory-set configuration variables, and other information.
2.9.1
Tag, date, descriptor and message
The
Tag
,
Date
,
Descriptor
and
Message
are parameters that provide transmitter identification in
large installations. See below for a description and a process to enter these pieces of
configurable device information.
The
Tag
variable is the easiest way to identify and distinguish between different transmitters in
multi-transmitter environments. It is used to label transmitters electronically according to the
requirements of the application. The defined Tag is automatically displayed when a HART-based
communicator establishes contact with the transmitter at power-up. The Tag is up to 8
characters and the Long Tag (a parameter introduced with the HART 6 and 7 protocol) was
SENSOR 1
SENSOR 2*
ANALOG
PV
AVG*
1
ST
GOOD*
DIFF*
% RANGE
TERM
MNMAX1*
MNMAX2*
MNMAX3*
MNMAX4*
BACK TO MENU
EXIT MENU
VIEW CONFIG
SENSOR CONFIG
UNITS
RERANGE
LOOP TEST
DISPLAY
DISPLAY
EXTENDED MENU
EXIT MENU
Summary of Contents for Rosemount 644
