Emerson Rosemount 5600 Series, Reference Manual, Page: 56 / 128

56
Reference Manual
00809-0100-4024, Rev CA
Electrical Installation
March 2020
Electrical Installation
3.2 System overview
Power supply
Connect the power supply to terminals 3 and 4 in the non-intrinsically safe Junction Box (EEx e).
Analog outputs
There are two analog outputs which can be of passive or active type (external or internal loop supply).
The primary output has a HART interface.
Connect the primary analog output to terminals 1 and 2.
Use the EExe junction box for non-intrinsically safe applications, and the EExi junction box for intrinsically
safe applications.
Digital communication
The Rosemount 5600 Series Radar Level Transmitter can be equipped with HART interface, and can be
either connected EExe or EExi.
Transmitter junction box
The standard version is equipped with two separate junction boxes, one non-intrinsically safe and one
intrinsically safe part. There is also an optional version with two non-intrinsically safe compartments.
Figure 3-1. Junction Boxes X1 and X2
Connection for display unit
ATEX: EEx i (Optional: EEx e)
FM: Intrinsically safe
(Optional: Explosion proof)
CSA:
Intrinsically safe analog outputs
(or conduit for non-IS outputs)
Flame-proof enclosure
ATEX: EEx e
FM: Explosion proof
CSA:
Power supply (FM: conduit fitting)
Primary analog output or serial
communication (FM: conduit fitting)