Emerson Rosemount 3490 Series, Reference Manual

Page: 45 / 190

Editing a numerical parameter
To understand the basics about editing a parameter setting, follow the worked example
for editing a numerical parameter.
Procedure
1. Navigate to SETUP
→
OUTPUT
→
CURRENT OUTPUT
→
Up Range Value
parameter
.
SETUP
APPLICATION
DISPLAY
OUTPUT
OUTPUT
CURRENT OUTPUT
Low Range Val
Alarm Action
Up Range Val
CURRENT OUTPUT
RELAY
TOTALIZER
Up Range Val P401
Esc =Quit
=Edit
12.000 m
When entering any parameter screen, it is in View Mode . Help with what can be
done next is on display line 4.
In View Mode , the Esc button is used to leave (quit) the parameter screen. The
SETTINGS menu then re-appears, as seen before selecting the parameter.
2. To enter Edit Mode , press the red (enter) button.
Up Range Val P401
Esc =Quit
=Edit
12.000 m
A
“+”
appears to show this positive sign can be changed to be a negative sign. The
up arrow or down arrow cycles between “+” and “–” . Also, note that on display
line 4, Edit has changed to be Save .
Up Range Val P401
Esc =Quit
=Save
+
12.000 m
Parameter is in Edit Mode . In this mode, selecting
Esc
button restores the original
setting and returns to View Mode .
3. Change the number from “+12.000” to “+6.500” .
Reference Manual Getting started
00809-0100-4841 January 2021
Emerson.com/Rosemount 45