Emerson Rosemount 2460, Reference Manual

Page: 15 / 240

3
Reference Manual
00809-0100-2460, Rev DE
Introduction
October 2018
Introduction
1.3 Section overview
The sections in this manual provide information on installing, operating, and maintaining the
Rosemount
™
2460. The sections are organized as follows:
Section 2: Overview provides a brief description of the various components in a Rosemount Tank
Gauging system and recommended installation procedure.
Section 3: Installation covers installation considerations as well as mechanical and electrical installation.
Section 4: Configuration describes how to configure the Rosemount 2460 System Hub by using the
TankMaster WinSetup configuration program. This section includes inventory calculations and how to
setup a pair of redundant system hubs.
Section 5: Operation describes what information that is provided by the Light Emitting Diodes (LED).
Section 6: Service and Troubleshooting covers tools, troubleshooting, and various service instructions.
Appendix A: Specifications and Reference Data contains specifications, dimensional drawings, and
ordering table.
Appendix B: Product Certifications contains information on approvals and certifications.
Appendix C: Enraf® Device Configuration describes how to configure the Rosemount 2460 tank
database using the TankMaster WinSetup configuration program. It also covers how to configure fast
polling and how to enable Vapor Temperature.
Appendix D: Servo Commands describes various commands that can be used for tanks configured as
servo tanks.
Appendix E: Whessoe Device Configuration describes how to configure the tank database of the
Rosemount 2460 for Whessoe devices.
Appendix F: Modbus® Standard Question lists the database registers which can be scanned in queries
from a Modbus master.
Appendix G: Fast Polling describes how to enable and configure fast polling for varioius devices.
Appendix H: L&J Device Configuration describes how to configure the tank database of the Rosemount
2460 for L&J devices.
Appendix I: Varec® Device Configuration describes how to configure the tank database of the
Rosemount 2460 for L&J devices.
Appendix J: Enraf® 858 CIU Configuration describes how to configure the Rosemount 2460 for Enraf 858
CIU emulation.