Emerson Rosemount 2230, Reference Manual, Page: 58 / 156

48
Reference Manual
00809-0100-2230, Rev CA
Configuration and Operation
July 2017
Configuration and Operation
4.6.3 Units for display
In the Units for Display menu, you can see which measurement units that are used for the displayed
variables. The available measurement units are listed in
Table 4-2 on page 49 .
To change measurement unit:
1. In View Mode, press <Menu> <Options> <Units for Display>:
2. Use the up and down arrow softkeys to navigate to the desired variable menu item. In the example
above, the Length variable was chosen.
3. Press the softkey to continue to the list of options for the selected variable.
4. Use the up and down arrow softkeys to navigate to the desired measurement unit.
5. Press the OK softkey to select the unit and return to Units for Display.
See Table 4-2 for a list of available measurement units.