Emerson Rosemount 2051 Wireless Series, Reference Manual, Page: 82 / 250

95
Reference Manual
00809-0100-4102, Rev AA
Appendix A: Reference Data
June 2012
Specifications and Reference Data
Pressure Testing
Expanded
P1
Hydrostatic Testing with Certificate
Cleaning Process Area
(14)
Expanded
P2
Cleaning for Special Service
P3 Cleaning for <1 PPM Chlorine/Fluorine
Performance
Standard Standard
P8
(15)
High Performance Option
★
Ground Screw
Standard Standard
V5
(16)
External Ground Screw Assembly
★
Surface Finish
Standard Standard
Q16 Surface finish certification for sanitary remote seals
★
Toolkit Total System Performance Reports
Standard Standard
QZ Remote Seal System Performance Calculation Report
★
Conduit Electrical Connector
Standard Standard
GE M12, 4-pin, Male Connector (eurofast
®
)
★
GM A size Mini, 4-pin, Male Connector (minifast
®
)
★
Typical Model
Number:
2051T G 5 F 2A 2 1 A B4
(1) 2051TG lower range limit varies with atmospheric pressure.
(2) Option code M4 - LCD Display with Local Operator Interface required for local addressing and configuration.
(3) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain
materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(4) “Assemble-to” items are specified separately and require a completed model number.
(5) Not available with low-power Option Code M.
(6) Not available with Alloy C-276 isolator (3 code), tantalum isolator (5 code), all cast C-276 flanges, all plated CS flanges, all DIN flanges, all Level flanges, assemble-to
manifolds (S5 and S6 codes), assemble-to seals (S1 and S2 codes), assemble-to primary elements (S3 and S4 codes), surface finish certification (Q16 code), and remote seal
system report (QZ code).
(7) Only available with HART 4-20 mA output (output code A).
(8) Not available with fieldbus (output code F) or Profibus protocols (output code W).
(9) Local zero and span adjustments are standard unless Option Code J1 or J3 is specified.
(10) Available only with output code W - Profibus PA.
(11) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(12) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA and IE.
(13) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(14) Not valid with Alternate Process Connection S5.
(15) High Performance Option includes 0.04% Reference Accuracy. See
Performance Specifications
for details.
(16) The V5 option is not needed with T1 option; external ground screw assembly is included with the T1 option.
Table A-6. 2051T In-Line Pressure Transmitter Ordering Information
★
The Standard offering represents the most common options. The starred options (
★
) should be selected for best delivery.
__ The Expanded offering is subject to additional delivery lead time.