Emerson RLDS, Installation And Operation Manual

Page: 10 / 82

2 • RLDS I&O Manual 026-1309 Rev 8
1.3.7. In Case of Malfunction
Do not continue to use this equipment if there are any
symptoms of malfunction or failure. In the case of
such occurrence, de-energize the power supply and
contact a qualified repair technician or the nearest
Service Center. ONLY the provided knockouts are to
be used for electrical and communication wiring.
Drilling into the box will void the warranty.
1.3.8. RLDS Fusing
F1, F2
1AMP, 250VAC
FAST ACTING
(Type “F”)
1.3.9. Installation Category
Installation Category II, Pollution Degree II, as

defined by UL.
1.3.10. Altitude Limit
RLDS 6,562 ft (2,000 m)
1.3.11. Cleaning
If, during period maintenance inspection it

becomes necessary to clean the outside of the case,
use a DRY CLOTH . To avoid shock hazard and/or
equipment damage, DO NOT USE SOAP AND
WATER.
1.4. Warning and Caution
Statements
1.4.1. Warning Statements
The use of the word WARNING in this manual

denotes a potential hazard associated with the use of
this equipment. It calls attention to a procedure,

practice, or condition, or the like, which if not

correctly performed or adhered to, could result in

injury or death of personnel using this instrument.
1.4.2. Caution Statements
The use of the word CAUTION in this manual

denotes a potential hazard associated with the use of
this equipment. It calls attention to a procedure,

practice, condition, or the like, which if not correctly

performed or adhered to, could result in damage to the
equipment.
Table 1-1 - Fusing Requirements