User Manual
Appendix A
GFK-2847Y
Aug 2020
Product Certifications and Installation Guidelines
87
Appendix A:
Product Certifications and
Installation Guidelines
The QuickPanel
+
Operator Interface is intended for use in industrial environments and, when
properly installed, shall comply with the agency approvals listed in this document.
A-1
Agency Approvals
Note:
The agency approvals listed in the following table and on the Declaration of Conformities
are believed to be accurate; However, the product’s agency approvals should be verified by
the marking on the unit itself.
Description
Agency Marking Comments
N.A. Safety for Programmable Controller for use
in Hazardous Locations
Class I Division 2 Groups A, B, C, D
(applicable to
7'', 10'', 12'', and 15” Display units)
Class I Division 2 Groups A, B, C, D;
Class 2 Division 2 Groups F, G;
Class 3 Division 1 and Division 2
(applicable to 6'' Display unit only)
Certification by Underwriter's Laboratories to
UL 61010-1; UL61010-2-201;
CSA C22.2 No 142
–
M1987;
CSA 61010-1; CSA 61010-2-201
ISA 12.12.01 standard and
CSA C22.2 No 213-M1987
Explosive Atmospheres Directive European
Safety for Hazardous Areas
Equipment Group II, Category 3,
Gas Groups IIC,
Dust Group IIIC
Certification in accordance with the ATEX
Directive 14/34/EU with an Independent 3rd
Party Assessment Certificate
only applies to the 12”
and
15” Display units:
EN 60079-0/A11, EN 60079-15, and EN 60079-
31;
Part numbers: IC755CSW07CDACA,
IC755CSS10CDACA, IC755CSS12CDBCA,
IC755CSS15CDACA
Electromagnetic Compatibility Directive
European Electromagnetic Compatibility (EMC)
for Industrial Control Equipment
Self-declaration in accordance with European
Directives
EN61000-6-2, EN61000-6-4
Maritime Society Certification
No Marking, verified
by certificate
American Bureau of Shipping (ABS),
Det Nortske Veritas/Germanischer Lloyds (DNV-
GL), and Bureau Veritas (BV) certification on
conformally coated
6
”
, 7
”
, 10
”
, 12
”, 15” units only
