User Manual
Chapter 5
GFK-2847Y
Aug 2020
Mounting and Installation
62
5.7
Connectors
5.7.1
Power Connector Pin-Out for IC755CxS06RDx,
IC755CxW07CDx, and IC755CxSxxCDx
Note:
Refer to Section 4.3.1, Connecting Input Power.
Connector: Terminal Euro (Tyco Electronics 284539-3)
Mating Connector: (Tyco Electronics 284510-3)
Pin # Signal Name Pin-Out
1
+24 Vdc
1
2
GND
3
FG
5.7.2
Ethernet for IC755CxS06RDx, IC755CxW07CDx, and
IC755CxSxxCDx
The QuickPanel
+
display is equipped with 10Base-T/100-Base-TX Ethernet port(s). Connect
an Ethernet network cable (unshielded-twisted pair, CAT 5) to the unit through the RJ-45
connector(s) on the bottom of the enclosure. LED indicators on the port indicate channel
status. The port can be accessed by Windows Embedded Compact 7 network
communications or by your application.
Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
Pin # Signal Name Pin-Out
1
TX+
2
TX-
3
RX+
4
NC
5
NC
6
RX-
7
NC
8
NC
Note:
Dual Ethernet ports are separate ports
(applicable only to QuickPanel
+
IC755CxSxxCDx 10”, 12”, and 15" display units)
1
IC755CxSxxCDx supports both +12 Vdc and +24 Vdc IN
