44 Chapter 5 Use Of Monitoring Module M800D
Set Date
2005-10-15
Set Time
20: 09: 09
In the preceding screen, user can set the date and time. For example, move the cursor “
” to “2005-10-15”, press
ENT to highlight the date, and then press ◄ or ► to change the date, after changing the date, press ENT to validate
the change.
IP Address
192.168.0.1
Subnet Mask
255.255.254.0
Default Gateway
192.168.0.1
Reload Config
Yes
M800D supports time setting and network function. User can modify the M800D IP address and Subnet mask to allow
other computers can access the M800D through IE, NMS and HLMS.
Power limit setting
Enter the parameter setting interface:
Parameter Set
M800D System
Rect Group
Batt Group
In the above interface, select “M800D System” and continue to press ▲ or ▼to show the screen of power limit
function as show below:
P limit Enb
Disable
Over Voltage
58.50
Note: User can set the power limit function to “enable” or “disable”. If the power limit function is set to be “Disable”,
the diesel generator will not be controlled by M800D and has to be controlled manually.
5.3 Access M800D Through Web
5.3.1 Overview Of Web Function
Web is a remote user interface, the user can
Browse the detailed status of each piece of equipment such as rectifiers, batteries, and AC unit.
Send control commands and set parameters to equipment.
View the active alarms that can be automatically popped up if a new alarm comes.
Query historical alarms, historical signal data and logs (battery test, diesel test, user control, system).
Change system parameters, such as IP address, time, SNMP and EEM protocol settings, user information.
Change equipment name, signal name and alarm level.
Download and upload configuration files, and update application software and local language package.
5.3.2 Login
To log in M800D, double-click the icon of IE to run the software, click the menus of Tools
Internet Options and then
click the button “Connections” to pop up the following screen:
NetSure 501 A50, NetSure 501 AA0, NetSure 701 A51 19-Inch Subrack Power Supply System User Manual
