Emerson Liebert XDP User Manual Download Page 33

Page: 33 / 80

Liebert iCOM Control—Firmware Version XP1.00.010.STD

4.2

Display Lamp Indicators

• The Green lamp will be On only when the Liebert XDP is On and running with no alarms.
• The Red lamp will be On if the unit is On and running with an active alarm, or if the unit is shut

down because of an alarm.

• The Red lamp will flash while an alarm is being annunciated. The Red lamp will stop flashing and

the beeper in the display will stop beeping when the ALARM SILENCE / ? key is pressed.

• The Amber lamp will be On if the Liebert XDP has been shut down at the I/O switch or if the unit

has been shut down by an alarm condition.

Table 12

Keyboard icons and functions

Icon

Key Name

Function

On/Off Key

Controls the operational state of the cooling unit.

Alarm Key

Silences an alarm.

Help Key

Accesses integrated Help menus.

ESCape Key

Returns to the previous display view.

Enter Key

Confirms all selections and selects icons or text.

Increase Key

(Up Arrow)

Moves upward in a menu or increases the value of a selected parameter.

Decrease Key

(Down Arrow)

Moves downward in a menu or reduces the value of a selected parameter.

Left and Right

Arrow Keys

Navigates through text and sections of the display.

Upper LED

Blinking Red—Active, unacknowledged alarm exists

Solid Red—Active, acknowledged alarm exists

Lower LED

Amber—Power is available to the unit; unit is NOT operating

Green—Unit is operating with no alarms

ESC

Summary of Contents for Liebert XDP

















































































Search results

Summary of Contents for Liebert XDP

Reviews:

Related manuals for Liebert XDP

Brands by name

Popular brands

Emerson Liebert XDP, User Manual

Search results

Summary of Contents for Liebert XDP

Reviews:

Related manuals for Liebert XDP

Brands by name

Popular brands