Emerson HART CAM16, Instruction And Operation Manual

Page: 46 / 93

CAM216/16 IOM
Doc. Number: ECM-402-0116 January 2016, Rev. 1
41
Section 8: HART Commands Definition
HART Commands Definition
8.2 Common Practice Commands
Device supports following Common Practice Commands –
Table 30. Common Practice Commands Table
Command Description
33 Read Device Variable
34 Write Primary Variable Damping Value
42 Perform Device Reset
49 Write Primary Variable Transducer Serial Number
50 Read Dynamic Variable Assignments
51 Write Dynamic Variable Assignments
54 Read Device Variable Information
56 Write Device Variable Transducer Serial Number
59 Write Number of Response Preambles
71 Lock Device
72 Squawk
76 Read Lock Device State
89 Set Real-Time Clock
90 Read Real-Time Clock
95 Read Device Communications Statistics
103 Write Burst Period
104 Write Burst Trigger
105 Read Burst Mode Configuration
107 Write Burst Device Variable
108 Write Burst Mode Command Number
109 Burst Mode Control
523 Read Condensed Status Mapping Array
524 Write Condensed Status Mapping
525 Reset Condensed Status Map
526 Write Status Simulation Mode
527 Simulation Status Bit