User Manual
Chapter 14
GFK-1742F
Jan 2020
Local Logic Configuration
319
Chapter 14:
Local Logic Configuration
14.1
CTL Bit Configuration
The programming software environment allows you to configure the input source for CTL
bits (CTL01-CTL24) using the Hardware Configuration screen. From the Hardware
Configuration screen, select the DSM314 module you wish to configure. Refer to chapter 4
for information on using Hardware configuration. The DSM314 configuration screens
contain a tab called CTL Bits. Selecting this tab results in a display similar to the one shown
in Figure 142.
Figure 142: CTL Bits Configuration
The configuration screen allows the user to select the CTL bit configuration that
corresponds with the Motion Program and Local Logic program. The sections that follow
provide additional information concerning the CTL bit configuration process.