Emerson Dixell XR70T, Installing And Operating Instructions

Page: 12 / 40

1592040000 XR70T EN v1.1 2019.07.09 XR70T 12/40
4.10 PARAMETER MENU
When in
Programmin Menu , it is possible to enter the Parameter Menu touching the PRG icon for 3 sec.
The Prog Level 1 icon will indicate the first level of the programming menu (group labels).
The Browsing icon will indicate that there are other groups of parameters.
…
When in
PROG LEVEL 1 , it is possible to browse through the available groups of parameters by using the H-
swipe gesture. The circular construction of this menu permits to move left or right through the groups.
Here are the available groups:
Group Label Description
rEG Main regulation parameters
Prb Probe configuration parameters
diS Visualization parameters
dEF Defrost configuration parameters
FAn Evaporator and condenser fan configuration parameters
AUS Auxiliary regulator parameters
ALr Alarm configuration parameters
oUt Digital and analogue output configuration parameters
inP Digital input configuration parameters
ES Energy saving configuration parameters
Cnt Counters, read only values
rtC Real Time Clock configuration parameters
E2 Memory storage management
CoM Serial Communication port configuration parameters
Ui User Interface configuration parameters
inF Information, read only parameters
PAS Password for entering protected menu parameters
4.11 PASSWORD MENU
When in the
PAS group, it is possible to set the password value by touching the PRG icon for 3 sec.
V-swipe on a single digit to modify the value, then confirm the password value by touching the PRG icon for
3 sec.
The new value will blink and after 2 sec the display will show:
•
Pr2 if the password is correct