Emerson Daniel Series User Manual Download Page 55

Page: 55 / 106

Turbine meter handling

3.1

Receive the turbine meter

WARNING

EQUIPMENT HANDLING AND OPERATING HAZARD
Wear personal protective equipment appropriate to the situation when working with

the turbine meter. Adhere to all safety standards and best practices for operating the

equipment.
Failure to comply may result in death or serious injury.

3.1.1

Unpack and inspect the turbine meter

Inspect the turbine meter upon receiving at the customer facility.

Procedure

1. Remove the turbine meter from the shipping container.
2. Inspect the turbine meter for damage.
3. See

Installation procedure

for Installation procedure.

3.2

Store the turbine meter

3.2.1

Rust inhibitor

Apply light oil or rust inhibitor on surfaces that are in contact with the environment only if
the turbine meter body is carbon steel.

3.2.2

Pack the turbine meter

Procedure

1. Use stretch wrap (not adhesive) to attach the correct size flange cover to the

turbine meter end flanges. This protects the unpainted surfaces of the flange
sealing.

2. A flush contact between the flange cover and the flange sealing face is important.

User manual

Turbine meter handling

P/N 3-9008-515

March 2019

User manual

Summary of Contents for Daniel Series











































































































Search results

Summary of Contents for Daniel Series

Reviews:

Related manuals for Daniel Series

Brands by name

Popular brands

Emerson Daniel Series, User Manual

Search results

Summary of Contents for Daniel Series

Reviews:

Related manuals for Daniel Series

Brands by name

Popular brands