Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual
Section 4: Configuration
3-9000-765 Rev H
June 2017
Daniel MeterLink setup
75
Section 4: Configuration
After the mechanical and electrical installation is complete and connectivity is established, use
the
Daniel MeterLink Software for Gas and Liquid Ultrasonic Meters Quick Start Manual
(P/N 3-9000-763) to setup initial communications with the meter.
4.1
Daniel MeterLink
setup
1.
Review the software operating system, hardware and peripheral requirements.
2.
Follow the installation instructions for your operating system (Windows® XP, Windows
Vista, Windows®7 or Windows® 8).
3.
Configure a direct connection driver for first time modem configuration for Daniel
MeterLink communications.
4.
Select the Daniel MeterLink
desktop icon and complete the information in the
Registration Wizard. This wizard will appear the when you first run Daniel MeterLink and
will provide you the following options.
5.
Select
File>Program Settings
and customize the user-preferences (e.g. User name,
Company name, display units, Liquid Meter volume units and other interface settings)
6.
Connect to your meter. If your meter is not shown in the list, select
Edit Meter Directory
and setup the connections properties.
7.
Run the Field Setup Wizard.
Options:
Register by e-mail
•
Select this option and click Next to register by e-mail. Your machine must be connected to
the Internet and have a default mail utility (i.e. Microsoft® Office Outlook®, Outlook®
Express, etc.) configured to use this option.
Register by phone
•
Select this option to register by phone. After clicking Next, a page will display with phone
numbers to dial.
Register later (remind me)
•
Select this option if you do not wish to register now, but would still like the wizard to
appear the next time you run MeterLink.
Register later using the Help | Register Program menu item (don’t remind me)
•
Select this option if you do not wish to register now and do not want this wizard to appear
the next time you run MeterLink. You can still register at a later time by selecting Register
Program from the Help menu
