When using a power module, the maximum recommended time-based acquisition rates
are:
•
Thumbnail spectrum — Once per day
•
High-resolution spectrum — Once every two weeks
•
Waveform — Once per month
On-demand data collection is not expected to have a significant impact on power module
life. If you are using a power module, keep in mind that even on-demand acquisitions can
have an adverse effect on the power module life if you request data, especially high-
resolution data, too frequently.
For more information on these data acquisitions, refer to the Data Import topics in AMS
Machinery Manager Help.
Enable Advanced Diagnostics application (standard)
You can remotely upgrade an installed CSI 9420 that is already part of a wireless mesh
network using either AMS Wireless Configurator or AMS Device Manager. There is no need
to walk to the device or remove it from the field.
Notes
•
If your CSI 9420 is not yet installed in the field, refer to
Enable Advanced Diagnostics application (alternative)
for instructions on how to perform the
upgrade using a HART modem or a 375 or 475 Field Communicator.
•
If you purchased an Emerson Smart Wireless Gateway, an installation DVD for AMS Wireless
Configurator should have been included in your shipment. Otherwise, contact Product
Support.
1.
In AMS Device Manager, select the CSI 9420 device that you want to configure.
2.
Verify that the device is Rev 4.
Configuration
60
MHM-97408, Rev 15
Summary of Contents for CSI 9420
