2 • Included In This Package
known, securely grounded object.
• Do not handle the printed circuit board without
proper protection against static discharge. Use a
wrist strap when handling PCBs. The wrist strap
clamp must be secured to earth ground.
1.3.3. General Precautions
Do not remove the ISIS’s metal cover—no user-ser-
viceable parts are inside. Removal of the cover will void
the warranty.
1.4. Included In This Package
Included in this package you should find the follow-
ing items:
• An ISIS
• A packing slip, which lists the factory settings for IP
address, machine name, and host log on
• ISIS Installation Instructions
• 3-conductor power cord
• Wall-mounting brackets (2)
• Hardware bag including miscellaneous screws, an
extra fan filter, and rubber feet for desktop mount
• Optional items (if ordered):
-
NP-UP-OS option: Full Windows NT Worksta-
tion software media (diskettes and CD) and li-
cense.
-
MDM-NP option: Factory-installed modem. In-
cludes a six-foot phone cable. Note that this op-
tion also requires the NP-UP-OS (full NT) option.
-
NP-485 option: factory-installed dual-port RS-
485 adapter. Ports are DB-9P (plug) types, which
require customer-supplied cables with DB-9S
(socket) ends to connect to the ISIS.
1.5. Compatibility
ISIS Compatibility with the CPC REFLECS and Ein-
stein product lines:
1.6. Installation and Start-Up
Read through the entire document before beginning
the installation procedure.
1.6.1. Unpack the ISIS
Unpack the ISIS and inspect the contents of the pack-
age for damaged or missing components. If damaged,
notify the appropriate carrier at once and return any dam-
aged components for immediate repair or replacement.
1.6.2. Install the ISIS
Installing the ISIS has four major steps:
1. Physical installation
2. Power Requirements
3. Power up and initial checkout
4. Connect to the ISIS
1.6.2.1.
Physical Installation
Tools Required
The following tools and supplies may be required for
installation:
• Appropriate nut driver or screwdriver (to install the
mounting brackets, if used)
• Small flat-blade screwdriver (for LON connector)
Table 1-1
ISIS Compatibility
Controller
Supported Y/N
REFLECS (Standard)
No
RMCC version 2.16
and higher
Yes
BCU version 2.20 and
higher
Yes
BEC version 4.14 and
higher
No
Einstein RX version
1.5F01 and higher
Yes
Einstein BX version
1.5F01 and higher
Yes
NOTE: For any ISIS compatibility questions,
contact CPC at 1-800-829-2724.
Table 1-1
ISIS Compatibility
Controller
Supported Y/N