Emerson COMX-CAR-610 COM Express Installation And Use Manual Download Page 50 | Manualshive

Page: 50 / 74

background image

Functional Description

COMX-CAR-610 COM Express Carrier Board Installation and Use (6806800K26D

)

50

4.2.1

LVDS

The graphic controller supports up to 24-bit colors per pixel so the COMX-CAR-610 could
support 24-bit LCD panels using different cables.

The board provides an LVDS and backlight header. The LVDS header is a 40 pin, dual-row
header, while the backlight is a 5 pin wafer header.

For information on pin assignments,

Table 3-4 on page 33

4.2.2

VGA

The carrier board supports VGA output from the COM Express connector. The VGA signals
come from the same connector as the HDMI signals.

For information on pin assignments,

Table 3-7 on page 34

.

4.2.3

HDMI

The COMX-CAR-610 supports an HDMI interface from DDI1 of the COM Express connector.

For information on pin assignments,

Table 3-8 on page 35

.

4.2.4

Display Port

The COMX-CAR-610 supports two Display Ports from DDI2 and DDI3 of the COM Express
connector.

For information on pin assignments, see

Table 3-9 on page 35

4.3

Audio

The COMX-CAR-610 supports line output, microphone output, and line input using industry
standard 3.5 mm mini-jack connectors. The board also provides a two-channel HD audio as
part of the integrated High-Definition Multimedia Interface (HDMI). The integrated HDMI
requires a 1.5 V CODEC.

For information on pin assignments, see

Table 3-10 on page 36

Table 3-11 on page 37

«
...
48
49
50
51
52
...
»

Summary of Contents for COMX-CAR-610 COM Express











































































Reviews:

No comments

Related manuals for COMX-CAR-610 COM Express

Brand: LittleLife Pages: 14

Brand: BushBaby Pages: 3

Brand: Kiddicare Pages: 7

Deluxe Back Pack

Brand: Baby Trend Pages: 5

Brand: Seco Pages: 40

COM-Express CCOMe-965

Brand: Seco Pages: 61

Brand: Seco Pages: 77

Brand: Seco Pages: 79

TRIO FOR ME NACELLE

Brand: Chicco Pages: 48

Brand: Chicco Pages: 96

Brand: Britax Pages: 268

CLOUD COOL MESH

Brand: Kolcraft Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands