6
U.L. Model No.: CF765-1
3. Ceiling Fan Assembly
(Continued)
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
6" DOWNROD
PIN
GREEN GROUND WIRE
GREEN GROUND WIRE SCREW
Figure 4
3.4
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the Downrod (Figure 4).
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 4).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.10.
MOTOR COVER
#10-24 x 10mm PAN
HEAD SCREW WITH
LOCKWASHER (3)
MOTOR COVER
REVERSE SWITCH
HOLE
REVERSE
SWITCH
Figure 3
3.3
Route the Two 80” Motor Wires through the center hole
in the Motor Cover.
Place the Motor Cover over the Motor by aligning the
Reverse Switch Hole in the Cover over the Reverse
Switch, as shown in Figure 3.
Secure by installing Three #10-24 x 10mm Pan Head
Screws with Lockwashers (supplied) (Figure 3).
Summary of Contents for CF765BQ01
Page 22: ...22 U L Model No CF765 1 Notes ...
Page 46: ...46 No de modelo U L CF765 1 Notas ...